Water Heater Repair Jacksonville Blog

Our blog is designed to give homeowners as much information on general plumbing repair tips, not just Jacksonville water heater repair advice.  Many home plumbing maintenance tasks homeowners can be well equipped  to take care of themselves.  Enjoy!

Water Heater Scale Control Tips

Posted by on Aug 25, 2016 in Electric Water Heater Repair Jacksonville, Gas Water Heater Repair Jacksonville, Water Heater Repair Jacksonville | 0 comments

There are negative effects on house appliances, consisting of the hot water heater, if Jacksonville property owners have hard water. Hard water will assist make scale buildup inside the water heater take place much faster. Scale contains primarily calcium and magnesium and looks like white bits. The long-term results of scale build-up will be to decrease the life-span of the hot water heater. In order to aid manage this happening, this will talk about a number of methods to assist avoid it from being an issue.

Hot Water Heater Storage Tank DrainingWater Heater Scale Buildup
Emptying the water tank will eliminate the mineral bits inside the tank. If one understands that a person water is very hard, this process must be done about twice a year to help control scale build-up. We will specify the general actions associated with doing so here, yet they are implied for instructional purposes only. It would be good to allow us to execute a hot water heater flush at your residence.

First turn off the hot water heater’s gas or power. Shut the cold water supply valve so fresh water is not entering while it is being drained and replenishing it. In order to make it a faster process, open a hot water sink faucet that is close in proximity to the hot water heater system. Attach a yard hose to the drain valve, situated at the bottom of the heater, and place the other end of the garden hose either outside or in a floor drain for the heater to empty. The water leaving the water heater may be hot, so care needs to be taken. After the tank is empty, close the drain valve, open the cold water supply again, and turn back on the gas or electricity.

Hot Water Heater Temperature Setting
Heat is one cause of scale buildup happening. The hotter the water in the water heater is, the much more calcium and magnesium will form strong deposits on the heating elements within the water tank. If the thermostat is set greater than it needs to be, the quicker the develop will happen. Though there are factors for having a high or reduced temperature setting that mostly depend on any kind of health and wellness issues in the home, yet we will not be entering into those details below. Producers typically pre-set and recommend a temperature level setting at 120 degrees Fahrenheit. If it is established higher than this, scale will gather faster. Below are more tips that will aid if one water is very hard.

Making use of vinegar will chemically prevent scale as well. Vinegar, though a weak acid, is safe to utilize. It is nice to use vinegar in order to help clean the storage tank after draining it. Before reconnecting the cold water supply and turning the power back on, close the drain valve and pour a gallon of cider vinegar right into the storage tank. Wait at least six hours for it to sit. Obviously, pick a time for emptying the water heater when no hot water will be needed for some time. Later, open the drain shutoff with the drain hose connected and allow some water flow through to eliminate the vinegar. Close the draining valve and reconnect the power.

Water Softener
One of the most helpful methods to assist with hard water issues throughout the house, not simply with a hot water heater, is to install a water softening system. In simple terms, it will remove the ions dissolved in the water that cause the calcium and magnesium to form. Keeping a water softener is easy enough to do. Sodium is usually the chemical used to substitute the calcium and magnesium ions, they will need to be changed every now and then. The advantages to the whole plumbing system with being able to manage hard water are large and could reduce requiring untimely water heater repairs and plumbing repairs.

Around the Internet Resources

Water Heater Failure Warning Indications

Posted by on Aug 15, 2016 in Water Heater Repair Jacksonville, Water Heater Replacement Jacksonville | 0 comments

There is no reason why Jacksonville house owners hot water heater should be able to operate for a very long time without should have repairs carried out on it. It has a good chance of doing so if some easy maintenance actions are done by homeowners to aid to make certain it will certainly last a really long time without needing numerous, if any kind of, repairs.

The dilemma we will examine is, when no, or not enough hot water flows out of a faucet like it once did. This short article is will look at just what to do when the water heater is not making hot water. This can happen for a number of reasons, and several signs the water heater has actually due to the fact that residents typically will miss. We will not be evaluating residents for missing out on these signs. There are some significant things that will happen ultimately, to let property owners know just what either a significant repair is required, or it is close to completion of its life.

How Old is the Hot Water Heater

It can be simple to not know the age of the water heater is in cases when the house one lives in was bought and not built by oneself, or installed by the homeowner in the past. Water heaters will continuously function for years, sometimes longer than the variety of years it is designed to work. Due to this, it is simple to forget when it was changed last. So, if house owners give it simply a little interest, one will be amazed at how long the water heater will certainly function well.

The hot water heater has a serial number stamped on it that states when it was made. One will need to weigh the option of repair to a hot water heater that is greater than 10 years old or spend a lot of money for constant repairs. It could cost less to update it.

Is There Discolored Water Coming From the Hot Water Heater

If stained water comes out of the hot water taps at home, it generally suggests there could be corrosion inside the hot water heater storage tank. This is not an excellent things to see. It is a natural event for the interior of the storage tank will start to establish rust eventually. Once that process begins, at some point the storage tank will eventually rust through completely. The important things to expect is water dripping from the tank, for it will eventually trigger a big mess if the hot water heater is not changed before the tank rusting through.

Nevertheless, there can be various other reasons why the water is rust colored. We will not be discussing them in this post, but please contact us so we can come evaluate exactly what could be happening.

The Water Heater is Making Odd Sounds

It is natural for sediment to establish on the inside of the water heater tank during the use of the hot water heater operating. As this sediment is heated and reheated all day long, the sediment will solidify, and causes reduced efficiency. A lot more energy is going to be needed to heat the water then. As more build up builds up it will start to create banging sounds from inside the storage tank. They may get extremely loud also. It is not as huge of a problem as it might sound to be. However, flushing the tank will remove the sediment. We would certainly favor to do this process for you, yet home owners are able to carry it out themselves. For safety and security factors though, we would absolutely prefer to assist.

There is Dampness Around the Water Heater

If moisture is accumulating around the hot water heater it might indicate that a little leak or crack in the tank is beginning. Since the heater is constructed of metal, it will expand when it heats. This movement could develop small cracks. This can be easy to occur with older equipment. However, do not worry if leaking water is noticed, for it could possibly also be originating from a plumbing fitting that needs to be tightened. Maybe coming from the temperature and pressure relief valve also. Dripping water look like a bad indicator, yet it can also be an easy solution and not a sign the water heater needs replaced.

Do not wait to contact us if any of these points are occurring. We need to set up an appointment to see exactly what the required Jacksonville hot water heater repair need to be. It is well to allow us manage and servicing done to the system to make certain the warranty is not invalidated by any kind of maintenance carried out by an unlicensed person.

Water Heater Repairs Jacksonville

From Visually.

Electric Water Heater Maintenance

Posted by on Aug 5, 2016 in Electric Water Heater Repair Jacksonville, Water Heater Repair Jacksonville | 0 comments

Electric hot water heater are really simple to maintain. A minimum of two times a year, have a look at your own. Make use of the list provided listed below to cover the basics:

Take a look at the supplier’s plate and record the age and capacity. The date of manufacture is generally located in the very first 4 digits of the serial number. The capacity should be detailed on home plate. Electric water heaters normally have an expected life of 10-15 years.

Starting on top and working toward all-time low, do you see any leakages, corrosion, or corrosion?Electric Water Heater Maintenance Jacksonville

Situate the cold water supply line and validate a non-leaking shut-off shutoff.

Confirm the cold water supply line goes into the water heater at the factor labeled ‘Cold’.

Find the warm water supply line exiting at the point marked ‘Hot’. Try running hot water at the closest faucet and inspect the temperature by feeling the pipe.

Confirm the Temperature Pressure Relief Valve is connected to an extension pipe that goes down to within 6 inches of the floor.

Locate both panel covers at the front center and lower locations of the heater. Get rid of both panels, using care not to touch electric wires, and validate temperature level change. It should be between 120-125 levels Fahrenheit. More than 130 F boosts risk of scalding.

With the panels off, keep in mind the outside problem of the burner. Rusty? These can be easily replaced. Note: you must shut off the electrical power to the system and drain the container prior to doing so. Replace panels.

Inspect the drain shutoff at the bottom of the tank. Check for dripping. Keep in mind to open valve and drain any sediment accumulation at least yearly. You could need a hose extension to the floor drain or tube and pump to the exterior. A word of caution: never ever drain more than a gallon while the electrical power is on to the system. Never ever turn on unit until tank contains water. When draining, continue the procedure till water is clear.

Validate a drain pan is positioned under the storage tank, specifically if on or over the floor of living market. This will certainly permit a forewarning needs to your tank create a leak.

One last note. Remember your electric water heater is wired in collection. This indicates if your top heating element is worn out, you will have no warm water. If the lower element has fallen short, you may have warm water. Constantly shut off the power to the system when eliminating or changing elements.

Do not think twice to let us know when you need a Jacksonville electric water heater repair!

Getting Rid of Jacksonville Water Heater Noises

Posted by on Jan 27, 2015 in Water Heater Repair Jacksonville | 0 comments

Water Heater Repair Jacksonville FL is regularly being contacted to have a look at a loud water heater. Popping and banging noises can be because of a problem with the water heater, but it’s additionally an inconvenience. We will explore the most typical reason your water heater could possibly begin producing noise and what you can possibly do to quiet it down! Prior to contacting a Jacksonville Florida expert, have a look at one of the most typical water heater issues and remedies.

The most possible cause a water heater is producing noiseHot Water Heater Repair Jacksonville FL

Once again, the sound may be a sign that the water heater has sediment deposits. The sediment originates from the water in the storage tank. It is primarily comprised of calcium and magnesium build up and is particularly an issue in houses that contain hard water.

Any time the sediment starts to develop in the bottom of the storage tank, it traps a small amount of hot water beneath it. This triggers the hot water to boil as the tank works. The sounds one may notice are the bubbles popping through the sediment.

Additionally, the sediment itself may very well be the reason for the sounds. The sediment sits at the bottom of the tank and might get burned up resulting in unusual sounds. And sometimes, the sediment can get taken up near the top of the tank and breaks off triggering sounds as it drops back down, striking the sides on its way.

The way to avoid a water heater from creating sound

If sediment build-up is precisely what is triggering the sounds, the heater needs to be assessed. Jacksonville Water Heater Repair is able to do this for you and give the tank a cleaning or recommend an additional remedy.

You can additionally avoid sediment build-up by getting a professional servicing on the storage tank a minimum of once a season. This procedure includes flushing the tank of any kind of deposits.

Yet another good possibility is to set up a water softener in your Jacksonville  house. Water softeners get rid of minerals from the water before it gets into the water heater, considerably decreasing sediment deposits.

To learn more regarding additional potential problems and options offer Hot Water Heater Repair Jacksonville FL a call!

Rheem Water Heater Wi-Fi Module

Posted by on Jan 12, 2015 in Gas Water Heater Repair Jacksonville, Water Heater Repair Jacksonville | 0 comments

Not to burst any ones bubble, no pun intended since we are looking at water heaters here, but more than 95 Percent of households continue to utilize a traditional water heater, not tankless ones. They simply function much better for bigger households with regards to where the tankless technology is at this point. Due to this, it is good that research and technology is still being thought about for the traditional water heater. Which leads Water Heater Repair Jacksonville FL to our conversation on Rheem’s Wi-Fi module designed for their gas and electric water heaters.Water Heater Repair Jacksonville FL

This Wi-Fi module allows property owners observe the operation of the water heater, regulate its energy usage and be notified about water leaks or other pricey failures. It is part of Rheems new EcoNet Home Comfort technology designed to regulate all Rheem HVAC and water heating systems. The controller costs around $100, which is priced nicely, in contrast to some programmable thermostats which can cost two to three times as much. The controller does only work together with select Rheem water heater models presently.

With a water heater being accountable for approximately 18 Percent of a household’s energy use, it would be attractive to have some control regarding it. Programming ones water heater from ones smartphone is now feasible because of the Wi-Fi water component.

Using the Rheem app to set schedules based on ones way of living and consumption demands the module makes it feasible to help save energy without any hassle. It may be programmed to cool down throughout the day while at work, or modified from ones phone if necessary. Wirelessly set the water heater to vacation mode, preventing it from heating and reheating water that no one would be utilizing.

The unit can additionally preserve water and cash by assisting to prevent calamities. Functions like leak detection, service diagnostics and system status will alert homeowners to issues before the water floods ones basement. Also according to Rheem, insurance companies happen to be intrigued in the leak detection aspect of the module, providing the opportunity for cost savings on home insurance.

Rheem plans to come out with even more EcoNet-enabled items soon, which includes a unique HVAC system also making use of an EcoNet Controller that combines air and water tracking.

This is fantastic solutions that can be employed for the most popular types of water heaters, the conventional storage tank heater. Water Heater Repair Jacksonville FL is confident that it will continue to progress, and together with the new water heater standards coming out in April 2015, it will make it less complicated for different manufactures to hop on the bandwagon and offer related or even symbiotic technology!

Ideal Water Heater Temperature Setting

Posted by on Mar 1, 2014 in Water Heater Repair Jacksonville | 0 comments

Much has been debated over exactly what is an ideal water heater temperature level setting. Lots of sources, consisting of ENERGY STAR, provide the energy conserving factors of temperatures of 120 degrees or lower. And yes, there are cost savings to be had, however reasonably for those whose current setting is closer to the typical factory preset temperature of 140 degrees.

On the other hand, not as many share information about the possibility of contracting Legionella bacteria with a lower setting, especially with a temperature lower than 120 degrees. OSHA mentions some excellent precautions for avoiding this.

Water Heater Repair Jacksonville’s conclusions are that it is something that each family has to weigh in terms of possible health concerns mainly. For those with youngsters or with elderly people in the home, a higher setting can be a water scalding issue. Conversely, those vulnerable to contracting respiratory infections, a higher setting ought to be used.

Below is an infographic highlighting the various temperature level growth ranges of Legionella.

Water Heater Repair Jacksonville

Water Heater Venting Methods

Posted by on Feb 18, 2014 in Gas Water Heater Repair Jacksonville, Water Heater Repair Jacksonville, Water Heater Replacement Jacksonville | 0 comments

Water Heater Repair Jacksonville is discussing the following ideas about proper water heater venting for homeowners to have a general understanding of how the various kinds of venting work. They are not meant to be how-to directions for residents to perform themselves. The training and licensing of an expert plumbing repair service technician is constantly crucial.Water Heater Repair Jacksonville

As far as gas water heaters go, there are 2 popular venting choices: direct vent water heaters and power vent water heaters. Depending upon which type of system one uses will rely on the direction the vent is set up from the water heater to the outside so the dangerous gases produced from the water heater’s burner are not released inside the house, but rather sent into the outdoors environment. You may have heard the term atmospheric water heater while looking at different kinds of water heaters. Likewise, air has to be sent into the water heater for combustion to occur.

This video gives some tasks to perform to help see if your water heater is currently properly vented:

Direct Vent Water Heaters
It is best if the air needed for combustion is from outside the home in order to decrease the threat of fires from the combustible vapors of the water heater. The air from outside will either be vented out a wall or the roof of the home. Direct vent systems will assist solve the problem of not having enough indoor ventilation by drawing in air from outside your house.

The standard principles of a direct vent water heater is that the heat produced from the burning of fuel is made use of to warm the water in the tank. The exhaust gases are then vented outside the house. Given that warm air is lighter than cool air, the exhaust gases will naturally rise and head out through the venting system. The optimal scenario is to have the vent pipes be installed to go vertically out from the water heater, with no need of any kind of blower to help push the gases out. One still has to be cautious about backdrafting, which is when the exhaust fumes get back into the house instead of escaping through the vent to the exterior. Also, conventional atmospherically-vented water heaters are not as energy efficient as other more current types that do not allow as much of the warm air produced to escape up through the vent pipes.

Among the category of direct vent water heaters there are various types we will not discuss now, that can have different types of kinds of venting options, like having a single or dual vent channel. Nevertheless, there are times when a blower is required to help with the removal of the gases, which leads this conversation to power vent water heaters.

The following video explains in more detail the details of a direct vent system:

Power Vent Water Heaters
As can be presumed from above, power vent water heaters have a fan or blower connected to help with the removal of exhaust gases from the hot water heater. There are times that a water heater can not be installed where it is easy to install a vertical vent or chimney. Because a fan is utilized for eliminating the exhaust gases, the vent pipes can be installed either horizontally or vertically, or a combination of both.

The major benefit then for power venting is that ones water heater can be set up almost anywhere in the home. An additional benefit is that usually PVC pipes can be used for the venting due to the fact that the blower will cool the exhaust air enough that it will not be too hot for the PVC pipe to manage.

Some drawbacks with a power vent system is that it may cost some to at first install if the existing venting system is not in place. And, the equipment expense of the blower (though not that costly) and if one needs to set up a power outlet within six feet of the water heater’s location. It will utilize some electrical power to run the blower but that also is not a big cost. Finally, the blowers, relying on the kind, run fairly quietly, however some residents do not like the added ambient sound it makes. With the appropriate installation Water Heater Repair Jacksonville can help decrease the sound of the blower within the home.

In conclusion, there are a fair amount of distinctions between direct and power vented water heaters. We recommend taking a look at the ENERGY STAR details here too in regards to the various energy efficiency scores for the various kinds of heaters. In regards to which one is finest for your house should be decided upon with a professional water heater replacement company.

Are Tankless Water Heaters Practical

Posted by on Jan 28, 2014 in Tankless Water Heater Repair Jacksonville, Water Heater Repair Jacksonville | 0 comments

There is a great deal of discuss the benefits and drawbacks of tankless water heaters verses storage tank water heaters. Water Heater Repair Jacksonville is going to start a conversation on tankless heaters today, pointing out a few of the claims and talking about the realities. They have advantages and downsides over conventional water heaters and it could just depend upon what ones specific use demands are that will figure out which type of the right one for ones house.Water Heater Repair Jacksonville

The fundamental concept of utilizing a tankless water heater is among being energy efficient. Water is heated as it is used, and not saved in the large tank of a traditional water heater, constantly warmed so it is all set whenever it is to be made use of. Also, since they can hold on the wall and take up essentially no space at all, they are extremely useful.

Electrical Usage

Considering that tankless water heaters do need 240 volts of electricity and up to 160 amps to establish, one could need to have ones electrical box upgraded to accommodate the power need of the unit. For example, and not to get excessively technical below, a traditional tank water heater has around a 4500 watt heating element, verses four, 7000 watt elements of a whole-house tankless one.

As for efficiency, According to the Partnership for Advancing Technology in Housing (PATH), and supported by Housing and Urban Development (HUD), “further testing is needed to determine if electric tankless water heaters will match the efficiency of tank-type heaters.”

Appropriate Sizing

Tankless systems are sized by the flow rate measured in gallons per minute (GPM). One will have to determine when and what ones highest demand of hot water is to correctly figure out the finest size system to get.

Below is the formula for figuring this out from Keltec Inc:

Flow rate (GPM)
Temperature rise ( T ºF)

Water Heater Repair Jacksonville FL

To determine the size and kilowatt rating you need, apply this formula:
“The result of this formula is the maximum kW needed to accomplish your project requirements for on-demand heated water. Other media will vary slightly. This formula is a nearly universal method of calculation for energy input to yield temperature at required water flow.”

Water Quality on the Tankless System

The quality of the water one has in ones house should be analyzed too in order to get the most from a tankless water heater. If ones water is high in mineral content, like calcium, they will develop on the coils gradually and decrease the life span of the unit. If the water hardness at ones home is above 11 grains per gallon, a water softener would be suggested. Producers do have de-liming instructions and normally have a caution light on the unit to recognize when this should be done. Nonetheless, keep in mind what the makers guarantee covers. If it is just against producer’s defect, this will not cover any repairs required due to ones water quality. In optimal conditions, a tankless system will last much longer than a standard water heater, which can help validate the higher initial product expense and installment expenses, but one will need to bear in mind keeping it running appropriately to earn back ones investment.

Service and Repair Costs

These costs are typically greater for a tankless system than a traditional water heater, just to have a heads up. Many individuals generally do not have their standard water heater services too regularly (sadly) but it is advised to have a tankless system professionally serviced when a year.

Instantaneous Hot Water

This should not be that huge of a deal, however though producers do advertise instant hot water. Undoubtedly one recognized that it takes a minute for the hot water being heated right away to go through ones hot water pipe to the faucet or shower. Though, if one is just turning on the faucet a little the tankless heater’s burner might not ignite if the faucet is not opened up more. As an example, a flow rate of one-half gallons to 2 gallons per minute is required for electric tankless heaters to heat water.

Depending upon the amount of hot water one needs at the exact same time, more than one unit will should be installed. This is simple to do, however undoubtedly increases the equipment costs while doing so.

Equipment and Set Up Costs

A typical price range for tankless heaters is around $800 to $1200. A common storage tank water heater it is around $300 to $500. Set up expenses are about $1200 and $300 respectively then too. One will, again, most likely require an electrical upgrade, as well as a different gas pipe setup (if making use of a gas tankless heater), and a new ventilation system. An advantage of replacing ones water heater with a system comparable to the existing one is many of these upgrades will not be required – they are already in place.

Advantages of Going Tankless

No stored water, which in itself has a number of advantages. Initially, if there was to be a leak with a tank heater, there can possibly be water damage to ones home. Likewise, one must flush the tank a minimum of as soon as a year to keep mineral build up low, but there is the capacity for smelly water odor, bad tasting water, and the development of legionella bacteria in the tank if it is not at a high enough temperature level. Standard water heaters take up far more space too.


Here is what Consumer Reports has found: “Gas tankless water heaters, which use high-powered burners to quickly heat water as it runs through a heat exchanger, were 22 percent more energy efficient on average than the gas-fired storage-tank models in our tests. That translates into a savings of around $70 to $80 per year, based on 2008 national energy costs. But because they cost much more than storage water heaters, it can take up to 22 years to break even longer than the 20-year life of many models. Moreover, our online poll of 1,200 readers revealed wide variations in installation costs, energy savings, and satisfaction.”

The Center for Energy and Environment says that “A 37% savings of water heating energy per household was found for replacing a typical natural draft storage water heater with a tankless one. However, this savings was not enough to offset the high incremental cost resulting in paybacks from 20 to 40 years.”

Finally, the National Rural Electric Cooperative Association concludes that “Tankless water heaters generally aren’t as energy efficient as well-kept tank water heaters. Insulation, temperature setback, timers, and heat traps can all lower energy costs with tank water heaters.”

One indicate is that yes, tankless systems will utilize less gas than a traditional gas water heater which does have its environmental benefits. Nevertheless, a great deal of electrical power is used, for electricity takes longer to heat water than gas. And, the majority of electricity is produced from burning nonrenewable fuel sources.


Just like any sort of innovation, the field of water heating is ever developing. Efficiency advances are increasing with standard gas and specifically electric storage type water heaters. There are various benefits with tankless and standard heaters that one will should think about. Do not be reluctant to let Water Heater Repair Jacksonville know of any concerns you might have in the decision procedure.

Check out our Tankless Water Heater Repair Jacksonville page too!

How to Flush a Jacksonville Water Heater

Posted by on Jan 17, 2014 in Water Heater Repair Jacksonville | 0 comments

Ok, so it is not an attractive water heater upkeep job, however it does require a little cleaning up from time to time. Yes, today Water Heater Repair Jacksonville is going to instruct one on the best ways to flush out a water heater. Some suggest doing this as soon as every one to 3 years, we feel it is best to do so as soon as a year. Doing this is not a tough or time consuming project – heck, let the kids aid even.

Why Flush a Jacksonville Water Heater?

If it is last the recommended life span of the system, it must have some sort of regular flushing done. Doing this will obviously assistant in having it run as efficiently as possible, which likewise implies conserving money on the expenditure of running the darn thing. That alone ought to be a great enough reason we feel!

In terms of water heater maintenance, flushing it will get free of the buildup of mineral deposits that natural occurs inside the water tank. If one has ever had loud sounds, popping, gurgling, mini-explosion noises, that is a sign that there is too much sediment inside the tank. This flushing procedure will help make certain that the tank heats up water far more quietly.

Step 1. If it is an electric water heater, turn the power off in the primary electric breaker box and turn the cold water supply off. If it is a gas heater, it is ok to leave the gas on – just turn the water off. Though, turn the thermostat setting dial to the pilot setting (make a note to remember what it was originally set at though for later on). Then, whichever faucet the water heater supplies is closest needs to be opened. This is usually easier than opening the pressure relief valve, however one can do that instead.Water Heater Repair Jacksonville

Step 2. At the bottom of the water heater is a drain valve that a garden watering hose can be attached to. There might be a cover over it depending on the brand. Think about turning the heat to the pilot setting a number of hours prior to flushing it if one desires so the water isn’t going to be as hot when it is drained. If that is not an option that’s fine, just make certain the garden hose used is in good condition to hold up against the greater temperature water.

Run the hose outside far from your house or if the water has cooled, one can drain the tank into containers.

Step 3. Open the water heater’s drain valve and start draining the water. For whatever reason the drain valve is normally made of plastic, so if one has an older water heater (and one that has not been drained since before time began) it may stick a little. Just beware to not break the plastic (which is why it would be good if the darn thing was NOT made from plastic).Water Heater Repair Jacksonville FL

Once the drain valve is open, also open the pressure relief valve on the heater. Water will (a minimum of it needs to if it pressure relief valve is working effectively) flow some from it. Attempt to let is flow steady and not too fast so it stirs up the sediment in the water heater. We want the sediment to drain out the bottom through the hose.

If draining in a bucket, even if having the hose drain into a bucket outside of the garage or basement where the water heater is found, fill a bucket and let it sit to see if the water is clear or if there is sediment, which will generally look like sand in the bottom of the container. Simply keep draining it up until the water is clear.

Step 4. Close the drain on the bottom of the tank and close the pressure relief valve if it is still open.

Step 5. Turn the supply of water on once more to fill the tank. Once it is full again, slowing open the pressure relief valve again to get some excess air out of the tank. Then, open a hot water faucet in the home to get much more air out of the system.

Step 6. Let the hot water in the bathtub run till a complete stream is streaming out. Once that occurs, it is ok to turn the power back on if it is an electric water heater, or reset the temperature setting for a gas water heater. Clearly, turn the bathtub faucet off. In about 20 minutes, the hot water ought to be heated up again.

There you go! Water Heater Repair Jacksonville FL is here to respond to any concerns you may have. Next take a look at our short article on what to do if one has no hot water.

Enhanced by Zemanta

Troubleshooting No Hot Water from a Water Heater

Posted by on Jan 15, 2014 in Water Heater Repair Jacksonville | 0 comments

Let us break down the discussion on why one may not have any hot water from the water heater into two different sections: having NO hot water and having LIMITED hot water.

No Hot WaterGas Water Heater Repair Jacksonville FL

In terms of having no hot water at all, Water Heater Repair Jacksonville recommends that it is probably due to the fact that of one of the following four various possibilities (a minimum of it is probably just one). Right here they are …

A Bad Pilot Light
Hopefully this holds true because it is the easiest of the five to repair. First check to see that it is still lit. One might need to take an appearance at the owners manual (sorry men, however in some cases we should check out instructions) if you are having a difficult time finding where it is located. Manufacturers due have a tendency to hide them nowadays it seems. And, to see what the manufacturers directions are for relighting the pilot light.

Gas Line Leak
If one has a gas water heater, there could be a leakage in the line. If one has an electric one, obviously neglect this as a possibility. Some people have a difficult time smelling gas, though my mom has an incredible ability to smell it I vividly remember as a child. It most likely will have the odor of rotten eggs. If this holds true, all jokes aside, turn the gas line off if one knows where it is and call the gas company and/or a plumbing company if one doesn’t live in Hot Water Heater Repair Jacksonville’s service area. This is a serious problem that requires immediate attention!

A Bad Thermostat
This might be the concern for both not having any hot water, or just not having enough hot water. To be on the safe side we included it in this section though. See to it the thermostat dial settings have actually not been bummed or modified by mishap. Our water heater is located in the garage and the happy fingers of twin youngsters like to go exploring now and then. If the
settings are exactly what they normally are, turn the setting up some and see if it does the technique. The thermostat can be changed for they do wear outperiodically.

A Bad Thermocouple
For gas water heaters, the thermocouple works in hand with the pilot light as a security device. If the pilot light is out, it avoids gas from being turned on, so it is type of crucial. Nevertheless, simple to alter if required. When the thermocouple begins to break, it “tells” the gas valve that the pilot is out so it turns off the gas. The burner will not light then and the pilot light goes out.

For electric water heaters, it makes use of a heating element inside to conduct the electrical current heating the water. These can also break and will lead to decreased hot water.

Not Enough Hot Water

Sediment Buildup
If one is not in the practice of flushing the water heater tank periodically, like a minimum of once every couple years, sediment from the water will accumulate in the bottom of the tank. If one ever hears popping or banging noises from the tank, that is probably why. This will ultimately decrease the heaters capability to make sufficient hot water. Regular flushing will normally solve this trouble. If the water in the house is extremely hard, using a water softener will help battle an excess amount of sediment accumulation too.

Various Other Possibilities
There could be a concern with the flame from the burner. Please make sure the location around and underneath the water heater stays clean from dirt. The water heater draws air up from below for the burner. Natural gas flames will burn bright blue with a yellow tip, while propane are more bluish green on the body of the flame.

It might hold true that the tank size is just too small and not able to deal with the water heating needs, however obviously if it is a new problem of inadequate hot water and ones usage level has actually not considerably increased, this will not be the case.

If any current repairs were made on the device something might be crossed in terms of the electrical connections or the cold and hot water connects, but again, very unlikely from most plumbing companies.

There are other possible causes, however for the sake of time here, Water Heater Repair Jacksonville FL simply wanted to share the most probably ones. Don’t hesitate to let us know of any assistance needed!

Water Heater Repair Jacksonville Video Overview

Posted by on Jan 5, 2014 in Plumbing Repair Jacksonville, Water Heater Repair Jacksonville | 0 comments

Water Heater Repair Jacksonville just put together a brand-new company video summary and we desired to share it with you today. Do not think twice to contact us for any plumbing repairs and replacements that you could need to have performed at work or at home.